Custom Dimensioned D28 3D Flexible Welding Table With Uniform Grid
Patterns
Custom Dimensioned D28 3D Flexible Welding Table With Uniform Grid
Patterns is a heavy-duty modular work platform engineered for precision
welding, assembly and inspection. Built with standardized D28 hole
systems and evenly spaced grid layout, it supports custom sizing to
match your workshop requirements, delivering reliable 3-axis
fixturing flexibility for diverse metal fabrication projects.
Core Structure Specifications
| Bore diameter | Φ28mm, with precision tolerances typically controlled to ±0.02mm |
| Standard grid | 100×100mm uniform orthogonal grid (non-diagonal), with hole
center-to-center spacing accuracy of ±0.05mm |
| Working surfaces | Standard D28 hole patterns are machined on five faces (top surface
plus four sides), enabling 360° multi-directional tooling expansion |
| Tabletop flatness | ≤0.05-0.1mm/m |
| Working surface perpendicularity | ≤0.05mm/200mm |
| Hole positional accuracy | <0.02mm |
| Structural treatment | Undergoes overall stress-relief aging treatment, ensuring
resistance to deformation during long-term use |
Core Features
Modular Flexible Fixturing System
Utilizes standard fixtures (such as locating pins, clamps, angle
brackets, square boxes, and V-blocks) and D28 standard holes for
rapid assembly; eliminates the need for custom welding jigs,
allowing a single platform to accommodate a wide range of
workpieces.
3D Spatial Positioning Capability
Unlike 2D welding tables, the five precision working surfaces
enable workpiece clamping at any spatial angle or height, making it
suitable for the welding and assembly of complex 3D steel
structures, frameworks, and irregularly shaped components.
Advantages of the Uniform Grid
Features a precise 100×100mm orthogonal grid with standardized hole
locations; enables quantifiable and repeatable fixture positioning,
ensuring consistent clamping during mass production and
significantly reducing dimensional errors in welding.
Custom Dimension Options
- Overall dimensions: Fully customizable length and width (standard range: 1000×1000mm
to 4000×2000mm)
- Side height: Options of 100mm, 150mm, or 200mm
- Features: Reinforced load-bearing capacity, thickened tabletop, mobile
casters, floor supports, custom hole patterns, auxiliary tabletops,
etc.
- Surface treatment: Options include nitriding, blackening, anti-rust coating, etc.
Ready to upgrade your metal fabrication setup?
Invest in our Custom Dimensioned D28 3D Flexible Welding Table With
Uniform Grid Patterns for reliable, repeatable welding results.
Get in touch for custom quotations, technical support and one-stop
solutions for your workshop.
